GRATING WORLD FLOOREX® raised pattern non-slip solid floor plate bears the distinctive and registered “boomerang” design, versus the leaf or lozenge patterns of other solid floor plate. In comparative tests, FLOOREX® demonstrated superior co-efficient of friction (skid resistance) over regular checker plate in dry, wet and oily conditions.
FLOOREX® is available in sheet sizes of 1250mm x 3000mm and 1250mm x 2500mm, as well as custom sizes. Nominal thicknesses are 2.0mm, 3.0mm and 4.5mm.
FLOOREX® is available in Stainless Steel (3CR12, 304, 316). Stainless Steel surface finishes are No.1, 2B, and shot blast.
FLOOREX® advantages are non-slip, strong and rigid, corrosion resistant, easy to clean, low maintenance, eye-catching, and hygienic.
FLOOREX® applications include flooring (factories, loading ramps, elevators, escalator approaches), stairtreads, kickplates, and protective fascias.
| PROPERTIES | 304 | 316 | 3cr12 |
| Density kg/m² (approximate) | 7900 | 8000 | 7700 |
| Modulus of Elasticity (E) Tensile Cpa | 195 | 195 | 207 |
| Thermat Conductivity @ 100 °C/w/m°C | 15.7 | 14.5 | 32.0 |
| Coefficient Thermal Expansion @ 100°C | 17.0 | 16.5 | 10.0 |
| Recommended Max Service temp. °C | 925 | 925 | 600 |
| Tensile Strength Mpa | 170 | 170 | 300 |
| Elongation % in 50mm | 40 | 40 | 20 |
| Hardness, Brinel | 200 | 200 | 220 |
| COMPARATIVE TEST RESULTS | ||||||||
| Pattern | Material | Finish | Co-efficient of Friction (u) | |||||
| Wellington Boot | Shoe (leather sole) | |||||||
| Dry | Wet | Oiled | Dry | Wet | Oiled | |||
| FLOOREX® | 3CR12 | No°1 | 0.55 | 0.49 | 0.43 | 0.67 | 0.62 | 0.53 |
| Checker Plate | Mild Steel | Galvanised | 0.51 | 0.36 | 0.30 | 0.48 | 0.44 | 0.20 |
| Checker Plate | Mild Steel | Normal | 0.49 | 0.34 | 0.26 | 0.44 | 0.44 | 0.17 |
| Std.5 Rib | Aluminium | Normal | 0.43 | 0.40 | 0.34 | 0.38 | 0.38 | 0.17 |
| SIZES | SHEET | |||||
| Normal Thickenss mm |
Overall Height mm |
Approx. Mass kg/m² |
Std. Size m | Approx. Mass kg/std size |
Max. Width mm |
Max. Length mm |
| 2.0 | 3.6 | 16.0 | 2.5 x 1.25 | 50.0 | 1250 | 3000 |
| 3.0 | 4.6 | 24.0 | 2.5 x 1.25 | 75.0 | 1250 | 3000 |
| 4.5 | 6.1 | 36.0 | 2.5 x 1.25 | 112.5 | 1250 | 3000 |
Note: All figures to be taken as nominal and should not be used as guaranteed values.
Load Tables on request for floor plates supported and securely welded or bolted on all four sides.